If you’re wondering how to remove shower riser rail, then you’d be glad that the article I have prepared for today is what you’re looking for. Shower rails are something that you might have not initially thought of when considering fixtures to install in your shower room area. However, it’s equally as important with the showerhead and shower arms because they basically hold everything in place.
Also, like other shower parts, it gets rusted sometimes and is no longer as functional compared before, which will require you to maintain them or remove them for replacements. In today’s article, I’ll provide you with a step-by-step guide on the entire process and the tools you will need to remove and install the brand-new shower riser rail. So without further ado, let’s begin and find out…
What is a Shower Rail (Shower Riser Rail)?
A shower riser rail, popularly known as shower rigid risers, is a shower room fixture that basically connects the showerhead from the main water outlet. Also, it holds the showerhead and shower arm in place. Therefore, the stability of your shower fixture relies on the quality of your shower riser rail. But before we fully understand how to remove shower riser rail, it’s important that we have to distinguish a shower riser rail kit from a regular shower rail.
Although they serve the same purpose, the two fixtures have different functionalities. For example, a shower rail is adjustable for better comfort for those who are taller, while a shower riser rail is fixed. However, the aforementioned is much more advantageous in the sense that it’s more stable and can support the entire shower fixture and, more importantly, your weight.
Tools You Will Need
You will need the following tools in order to accomplish this task—
- Philip Screwdriver
- Flat Screwdriver
- Allen Wrench
- Oil Lubricant
Step by Step Guide
A shower riser rail is much easier to manage compared to a regular shower rail simply because it is fixed, and there are no complicated mechanisms that you may have to attend to. Now, below is the step by step guide to the process—
First Step – Unscrew the Bolts
First and foremost, you have to unscrew the bolts. In most cases, the shower rails require a Philip screw to remove joints. But in some cases, a flat is necessary to safely detach the entire railing. Be sure to unscrew all of the joints and carefully remove them from the wall in order not to damage the item or the wall.
Second Step – Scrape off the Rusts
The primary issue with shower fixtures is that they accumulate rust over time. It may take time and patience to treat the rust and regain the luster of the shower rail. But in order to begin, you will need to spray the area with a lubricant on the joints. And then, the shower rail will be soaked under the solution to completely remove the rust.
Third Step – Clean the Screws
In some instances, grimes accumulate on the screws as well. In this case, you also need to brush them with lubricant. You also have to bear in mind that you’ll need a stronger type of lubricant, such as an anti-rust lubricant, to effectively scrape off the unwanted rust. In addition, you’ll have to straighten them using an Allen wrench if the screws are no longer aligned.
Fourth Step – Use a Hammer if Necessary
In some events, the glue attaching the rail to the wall could be difficult to remove. Therefore, a hammer would be appropriate to do this task. Again, it has to be taken with caution and not pressed too hard to prevent any damage. Also, you can use a hammer to straighten the shower rail in instances that it is bent. However, you have to be careful in using the hammer because it may misalign the rod if you are unable to approximate the power of the strike.
Fifth Step – Detach the Shower Riser Rail from the Wall
Once you have successfully complied with the previous task, it is the best time to pull the shower riser rail off the wall. Although the joints and glue have been removed, you still have to observe diligence in carefully detaching the rails from the wall. This is because there are still residues that may potentially damage the railings once you have pulled them off with force.
The topic of how to remove shower riser rail may seem to be an area of expertise that a professional may only accomplish. However, you don’t necessarily need them, and you can remove the shower rail in place and remedy the situation by yourself.
It may appear complicated at first sight, but all you need to do is gather the necessary items for the task and follow the steps I have relayed above. As a result, it won’t only give you the confidence to do it yourself next time, but it will also help you save money. That’s just about it in today’s discussion! Thank you for the time and effort in reading today’s topic on how to remove shower riser rail!
Frequently Asked Questions about How to Remove Shower Riser Rail
Below are some of the common queries about how to remove shower riser rail—
Normally, the plastic dish soap is attached to the wall with the shower rail with adhesive tape. And to remove the plastic dish soap, you will need a hammer. But you have to be careful removing them by being conscious of the force you are exerting. This is to prevent the rail and any of the items attached to it from damaging.
In most cases, the bathroom faucet is the only water outlet you have to turn off. But if you want to be sure that no accidents would occur, and if it would give you comfort, then you may turn the main water system off temporarily as you work with your shower rails.
It may be challenging to accomplish such tasks, but it is possible by using simple household items such as the humble sandwich bag and vinegar. Like cleaning shower head with vinegar,fill the plastic bag with vinegar and wrap it around the shower head to loosen the joints connecting it. You have to wait for three hours before you can remove them.